Clean Water Systems

Whole-House Water Filtration in Bixby, OK

Clean Water Systems installs whole-house filtration for homes throughout Bixby, Oklahoma and the surrounding Tulsa and Wagoner Counties. Every job starts with a free in-home water test and a system sized to your actual water, not a generic spec sheet. Owner Aaron Smither has spent 15+ years installing water treatment across the Tulsa metro and Eastern Oklahoma.

Get a Free Water Test (918) 918-2216

Why Bixby Homes Need Whole-House Water Filtration

Bixby (approximately 30,000 residents, in Tulsa and Wagoner Counties) is served by Bixby Public Works Authority (PWSID OK3007243; water purchased wholesale from the City of Tulsa). Drinking water comes from treated surface water purchased from the City of Tulsa via consecutive connection (Tulsa source water is Spavinaw Lake and Oologah Lake). Hardness at the tap is moderately hard, mirrors TMUA finished water (hardness is not reported in the Oklahoma DEQ CCR template, so we test on site before sizing softeners).

For most Bixby homeowners that means visible scale on faucet aerators and showerheads within a year, water heaters that fail earlier than rated, and detergent and soap that never quite lather. A properly sized whole-house filtration fixes the water that arrives at every fixture in the house, not just the kitchen tap. For the regional context behind these recommendations, see our full water-treatment guide.

How Our Whole-House Water Filtration Works

Point-of-entry filtration that treats every fixture in the home, taste, smell, sediment, and disinfectant by-products at the kitchen tap, the shower, the laundry, and the ice maker.

Every install starts with a real water test. We do not size off a utility average. The Tulsa-metro distribution loop carries seasonal variation, and the actual water at your kitchen sink may differ from the headline numbers in any utility's annual Consumer Confidence Report. For deeper background, read How Hard Water Damages Oklahoma Homes or our Whole-House Water Filtration service page.

What's Included in a Clean Water Systems Install

  • Pre-install water test, including chlorine, sediment, pH, and TDS
  • Sediment pre-filter sized to your service line
  • Catalytic carbon or coconut-shell GAC tank for chlorine and taste
  • Bypass valve, pressure gauges, and clean-out installed at the manifold
  • All connections sweated or PEX-crimped to local plumbing code
  • Post-install flush, pressure test, and walk-through
  • Replacement schedule documented for cartridges and media

For more on materials and equipment selection across our full service lineup, see our company overview and the related Reverse Osmosis Drinking Water in Oklahoma.

Bixby-Specific Considerations

Bixby sits in Tulsa and Wagoner Counties. The water you drink, cook with, and shower in is treated by Bixby Public Works Authority (PWSID OK3007243; water purchased wholesale from the City of Tulsa) (see the utility's water-quality page).

Notable local water-quality details:

  • free chlorine residual carried over from the Tulsa wholesale supply (CCR-reported running annual average 1.9 mg/L, max monthly 2 mg/L) (source)
  • TTHM running annual average 31 ppb (range 17.8 to 46.8); HAA5 running annual average 15 ppb (range 8.95 to 22.8), within EPA limits (source)
  • Bixby was cited by Oklahoma DEQ for a Lead and Copper Rule monitoring violation covering 1/1/2022 to 12/31/2024 (samples missed, not exceedances). The most recent reported lead 90th percentile is 0 ppb (2019 to 2021) (source)

For the most current numbers (free chlorine residual, total trihalomethanes, hardness, lead and copper at the tap), pull Bixby's most recent Consumer Confidence Report directly from the utility. We bring a fresh on-site test to every consultation.

Water quality data on this page is sourced from the Bixby Public Works Authority (PWSID OK3007243; water purchased wholesale from the City of Tulsa) 2025 Consumer Confidence Report, covering calendar year 2024, published by the Oklahoma Department of Environmental Quality (CCR PDF).

Service Area: Bixby Neighborhoods and ZIPs

We install for homeowners across Bixby. Common neighborhoods and areas we serve include White Hawk, South Lake, Stonebrooke, Charleston Park, plus the broader Tulsa and Wagoner Counties area. Primary ZIP codes: 74008. Outside this list? We still likely serve you, most of the Tulsa metro is in our normal service zone. Schedule a free water test or call (918) 918-2216.

Looking at a neighboring city or a different system? See Whole-House Water Filtration in Tulsa, OK or Water Softener Installation in Bixby, OK.

Frequently Asked Questions

What does a whole-house filter remove from Bixby city water?

For homes on Tulsa-metro municipal water, a properly built whole-house carbon system targets free chlorine residual, taste and odor, sediment, and disinfection by-products. It does not remove dissolved minerals, that is the softener's job, and it does not remove dissolved solids, that is reverse osmosis.

How often do filters need changing?

Sediment cartridges typically run six to twelve months in this region. Carbon tank media commonly lasts five to seven years for chlorinated municipal supply. We document a replacement schedule on your invoice and call you before the carbon bed is exhausted.

Do I need a whole-house filter if I already have city water in Bixby?

City water meets EPA primary standards, but disinfection by-products and chlorine taste are aesthetic concerns the EPA does not regulate at the same threshold. A whole-house filter is about water you want to drink, shower in, and cook with, not water that is dangerous.

Ready to fix the water at your Bixby home?

Free in-home water test. No high-pressure sales. A written quote with the system sized for your home.

Schedule a Free Water Test (918) 918-2216