Clean Water Systems

Reverse Osmosis System Installation in Bixby, OK

Clean Water Systems installs reverse osmosis installation for homes throughout Bixby, Oklahoma and the surrounding Tulsa and Wagoner Counties. Every job starts with a free in-home water test and a system sized to your actual water, not a generic spec sheet. Owner Aaron Smither has spent 15+ years installing water treatment across the Tulsa metro and Eastern Oklahoma.

Get a Free Water Test (918) 918-2216

Why Bixby Homes Need Reverse Osmosis System Installation

Bixby (approximately 30,000 residents, in Tulsa and Wagoner Counties) is served by Bixby Public Works Authority (PWSID OK3007243; water purchased wholesale from the City of Tulsa). Drinking water comes from treated surface water purchased from the City of Tulsa via consecutive connection (Tulsa source water is Spavinaw Lake and Oologah Lake). Hardness at the tap is moderately hard, mirrors TMUA finished water (hardness is not reported in the Oklahoma DEQ CCR template, so we test on site before sizing softeners).

For most Bixby homeowners that means visible scale on faucet aerators and showerheads within a year, water heaters that fail earlier than rated, and detergent and soap that never quite lather. A properly sized reverse osmosis installation fixes the water that arrives at every fixture in the house, not just the kitchen tap. For the regional context behind these recommendations, see our full water-treatment guide.

How Our Reverse Osmosis System Installation Works

Under-sink reverse osmosis systems for drinking water and ice. Removes chlorine, dissolved solids, lead, arsenic, fluoride, nitrates, and PFAS to bottled-water quality at the kitchen tap.

Every install starts with a real water test. We do not size off a utility average. The Tulsa-metro distribution loop carries seasonal variation, and the actual water at your kitchen sink may differ from the headline numbers in any utility's annual Consumer Confidence Report. For deeper background, read Reverse Osmosis Drinking Water in Oklahoma or our Reverse Osmosis System Installation service page.

What's Included in a Clean Water Systems Install

  • Pre-install TDS reading and tap-water test
  • Four to five stage RO unit installed under the kitchen sink
  • Dedicated RO faucet drilled or fitted to existing air-gap hole
  • Storage tank pressurized and leak-tested
  • Refrigerator and ice-maker line tied in (when reachable)
  • System sanitized and post-TDS reading documented (typical RO output 5 to 25 ppm)
  • Filter and membrane replacement schedule documented

For more on materials and equipment selection across our full service lineup, see our company overview and the related Tulsa Water Softener Cost in 2026.

Bixby-Specific Considerations

Bixby sits in Tulsa and Wagoner Counties. The water you drink, cook with, and shower in is treated by Bixby Public Works Authority (PWSID OK3007243; water purchased wholesale from the City of Tulsa) (see the utility's water-quality page).

Notable local water-quality details:

  • free chlorine residual carried over from the Tulsa wholesale supply (CCR-reported running annual average 1.9 mg/L, max monthly 2 mg/L) (source)
  • TTHM running annual average 31 ppb (range 17.8 to 46.8); HAA5 running annual average 15 ppb (range 8.95 to 22.8), within EPA limits (source)
  • Bixby was cited by Oklahoma DEQ for a Lead and Copper Rule monitoring violation covering 1/1/2022 to 12/31/2024 (samples missed, not exceedances). The most recent reported lead 90th percentile is 0 ppb (2019 to 2021) (source)

For the most current numbers (free chlorine residual, total trihalomethanes, hardness, lead and copper at the tap), pull Bixby's most recent Consumer Confidence Report directly from the utility. We bring a fresh on-site test to every consultation.

Water quality data on this page is sourced from the Bixby Public Works Authority (PWSID OK3007243; water purchased wholesale from the City of Tulsa) 2025 Consumer Confidence Report, covering calendar year 2024, published by the Oklahoma Department of Environmental Quality (CCR PDF).

Service Area: Bixby Neighborhoods and ZIPs

We install for homeowners across Bixby. Common neighborhoods and areas we serve include White Hawk, South Lake, Stonebrooke, Charleston Park, plus the broader Tulsa and Wagoner Counties area. Primary ZIP codes: 74008. Outside this list? We still likely serve you, most of the Tulsa metro is in our normal service zone. Schedule a free water test or call (918) 918-2216.

Looking at a neighboring city or a different system? See Reverse Osmosis System Installation in Tulsa, OK or Water Softener Installation in Bixby, OK.

Frequently Asked Questions

Why install reverse osmosis in Bixby?

Reverse osmosis is the only point-of-use technology that consistently removes dissolved solids, lead, arsenic, fluoride, nitrates, and PFAS to bottled-water quality. For Bixby homes, that means crisp drinking water and clear ice from the same line, without buying jugs.

How much water does an RO system waste?

Older RO systems wasted four gallons to make one. Modern systems we install run a one-to-one or even better recovery ratio thanks to permeate-pump or tankless designs. Over a year of typical kitchen use, the waste is comparable to one or two extra dishwasher cycles.

Will an RO system run my refrigerator water and ice?

In most cases, yes. We tee off the RO storage tank to feed the fridge ice maker and water dispenser, provided the run is short enough to maintain pressure. On longer runs we add a permeate pump.

How often do filters need changing?

Sediment and carbon pre-filters change every six to twelve months. The RO membrane itself typically lasts three to five years on Tulsa-metro feed water, longer when a softener is installed upstream.

Ready to fix the water at your Bixby home?

Free in-home water test. No high-pressure sales. A written quote with the system sized for your home.

Schedule a Free Water Test (918) 918-2216